Take your riding to the next level with the ELEVATE kit by IceAge Performance. Starting with the already impressive platform of the Ski-Doo/Lynx chassis, we took years of testing to perfectly hone a spindle / suspension setup combination that drastically improves the agility, handling, and deep snow performance by lifting the chassis without any negative side effects. This increase in height allows the sled to glide over the snow with ease and reduces running board and side panel drag, as well as front end predictability. The ELEVATE kit turns your Ski-Doo Gen4 & Gen5 into a machine capable of dominating the gnarliest terrain the mountains can throw at you. The kit includes spindles, and suspension setup guide, and all the hardware necessary to install.

Spindle

• Bulkhead height and snow clearance increased by 1 inch
• Reduce offset by 50% to decrease steering effort and reduce "auto-steer"
• Single piece billet 6061 T6 aluminum construction for unmatched strength
• 2 tone machined / black anodized finish
• Precise side-hilling in steep terrain
• Controlled playfulness

Heavy duty replacement slide rails for your G5 Chassis Ski-Doo Summit 2023 or newer.

These are designed to fit your Freeride, Expert Package, X, Edge and SP models, length 146-175

Cut from 7000 series aluminum on our proprietary Lightweight extrusion allowing for maximum strength and minimal weight.

Arm spacing is the same for 146-175" summit and freeride models, so you can stretch or shorten your sled either direction.

Kits come with 2 rails, 2 hyfax, fasteners and instructions.

IT IS IMPORTANT TO FILE/GRIND THE TRANSITION OF THE HYFAX/SLIDES TO THE RAIL TIPS TO ENSURE THERE IS NOT A LIP ON THE FRONT EDGE OF THE HYFAX FOR TRACK CLIPS TO CATCH

PLEASE AVOID POWDERCOATING OR OTHER COATINGS THAT REQUIRE A BAKE PROCESS - THIS REMOVES THE TEMPER FROM OUR RAILS, WEAKENING THEM SIGNIFICANTLY AND VOIDING ALL WARRANTIES

**Rails are pre-drilled to accept our ULTRALIGHT rail braces. These go under the rear bump stops and bridge the low center section of the rail required by the summit's suspension design. This allows you to maintain maximum rail strength on big impacts without sacrificing skid travel by increasing rail height. ULTRALIGHT rail braces are highly recommended for Summit riders who like to hit jumps and drops!**

DESIGNED FOR ICEAGE RAILS  - WILL NOT FIT STOCK RAILS

Made out of 7000 series aluminum, our Ultralight Rail Brace Kit increases strength at the rear bump stop section of the rails. This is a must have for Ski-Doo Gen5, Gen4, and XM snowmobiles that are frequently being jumped, are under high load impact, or if you want added strength for peace of mind! The kit includes 2 stiffener plates and hardware for mounting.

IceAge rails for Gen5, Gen4, and XM are all pre drilled to accept the Ultralight Rail Brace. Other models are not directly compatible and may require drilling. Will not work on Polaris RMK Pro, RMK Khaos machines. 

Photos pictured are IceAge Ski-Doo Gen4 Classic rails.

Dimensions:

• 13" overall length
• 11" center to center on outside holes of brace with one hole in the center

With input from our Backcountry Team, the new FOX lightweight mountain shocks for the Ski-Doo GEN5 improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control, especially in coil-over shock applications.

SKI SHOCKS ARE COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS,  34" or 36" FRONT ENDS INCLUDING LYNX RADIEN²

REAR SKID SHOCKS ARE COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS ONLY

SHOCKS FEATURES

• Simple to use QS3 Compression / Rebound Adjustment

• Lightweight Coil spring - tool free adjustment

• Lightweight bodies and caps

• Bypass technology for plush ride

• Premium Fox Factory calibration

• Preset / ready to ride right out of the box.

This shock is hands down the biggest performer for the dollar you will see on a modern mountain sled. The new lightweight coil spring and adjuster make for simple easy to change adjustments without the need for tools. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

With input from our Backcountry Team, the new FOX lightweight mountain shocks improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control, especially in coil-over shock applications.

COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS,  34" or 36" FRONT ENDS INCLUDING LYNX RADIEN²

Shocks Features

• Simple to use QS3 Compression / Rebound Adjustment

• Lightweight Coil spring - tool free adjustment

• Lightweight bodies and caps

• Bypass technology for plush ride

• Premium Fox Factory calibration

• Preset / ready to ride right out of the box.

This shock is hands down the biggest performer for the dollar you will see on a modern mountain sled. The new lightweight coil spring and adjuster make for simple easy to change adjustments without the need for tools. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

ALL WHEELS SOLD INDIVIDUALLY

Some say you should not try to reinvent the wheel. We beg to differ!

This is the solution we've all been waiting for. Our HELLFIRE wheel combines the tried and true strength of our billet Spitfire wheel with a new hybrid UHMW plastic outer ring for reduced weight, added serviceability, and most importantly the elimination of ice build-up issues.

With thousands of miles of testing in varying conditions and terrain behind us, we can confidently affirm that HELLFIRE is the ideal combination of strength, bearing support, light weight, style, and user serviceability to make it the longest-lasting and most versatile option on the market. 

Will not bolt on directly to stock polaris rmk/khaos rails, you will need the BIG WHEEL KIT w/ 7.25 to 9" offset axle to run HELLFIRE wheels on stock rails.

8" size is directly compatible with:

- Polaris RMK/Khaos models 2006 to 2024 equipped with ICEAGE rails

- Skidoo Summit 2013 to 2024

- LYNX 2022+ Boondocker and Shredder 146 (3700) or longer

- Arctic cat twinrail mountain sleds 2012-2018 w/ the addition of our Arctic Cat Proclimb/Ascender wheel spacer , 2019+ models are compatible with the additional of our 2-wheel 1/2" slot axle

- Yamaha Sidewinder M-TX Twinrail sleds 2013-2018 w/ the addition of our Arctic Cat Proclimb/Ascender wheel spacer , 2019+ models are compatible with the additional of our 2-wheel 1/2" slot axle

 Does not include axle.

Key features:

• Reduced rotating mass from previous designs - (lighten your skid and increase throttle response)
• Ice-free UHMW outer ring
• User serviceable 
• Superb hub strength 
• Compatible with studded tracks!
• Koyo 6004 bearing pre-installed