MTNPROVEN build - SkiDoo Summit

The ultimate in performance and durability for your SkiDoo gen5 Summit or Freeride

shop now
1/6

Spindles

ELEVATE // Ski-Doo & Lynx

ELEVATE // Ski-Doo & Lynx (Required)

ELEVATE // Ski-Doo & Lynx

ELEVATE // Ski-Doo & Lynx

Take your riding to the next level with the ELEVATE kit by IceAge Performance. Starting with the already impressive platform of the Ski-Doo/Lynx chassis, we took years of testing to perfectly hone a spindle / suspension setup combination that drastically improves the agility, handling, and deep snow performance by lifting the chassis without any negative side effects. This increase in height allows the sled to glide over the snow with ease and reduces running board and side panel drag, as well as front end predictability. The ELEVATE kit turns your Ski-Doo Gen4 & Gen5 into a machine capable of dominating the gnarliest terrain the mountains can throw at you. The kit includes spindles, and suspension setup guide, and all the hardware necessary to install.

 

Spindle

  • Bulkhead height and snow clearance increased by 1 inch
  • Reduce offset by 50% to decrease steering effort and reduce "auto-steer"
  • Single piece billet 6061 T6 aluminum construction for unmatched strength
  • 2 tone machined / black anodized finish
  • Precise side-hilling in steep terrain
  • Controlled playfulness

ELEVATE // Ski-Doo & Lynx

$902.00
ELEVATE // Ski-Doo & Lynx
Next
2/6

Rails

Ski-Doo Gen5 Summit/Freeride Rails

Ski-Doo Gen5 Summit/Freeride Rails (Required)

Ski-Doo Gen5 Summit/Freeride Rails

Ski-Doo Gen5 Summit/Freeride Rails

Heavy duty replacement slide rails for your G5 Chassis Ski-Doo Summit 2023 or newer.

These are designed to fit your Freeride, Expert Package, X, Edge and SP models, length 146-175

Cut from 7000 series aluminum on our proprietary Lightweight extrusion allowing for maximum strength and minimal weight.

Arm spacing is the same for 146-175" summit and freeride models, so you can stretch or shorten your sled either direction.

Kits come with 2 rails, 2 hyfax, fasteners and instructions.

IT IS IMPORTANT TO FILE/GRIND THE TRANSITION OF THE HYFAX/SLIDES TO THE RAIL TIPS TO ENSURE THERE IS NOT A LIP ON THE FRONT EDGE OF THE HYFAX FOR TRACK CLIPS TO CATCH

 

PLEASE AVOID POWDERCOATING OR OTHER COATINGS THAT REQUIRE A BAKE PROCESS - THIS REMOVES THE TEMPER FROM OUR RAILS, WEAKENING THEM SIGNIFICANTLY AND VOIDING ALL WARRANTIES

**Rails are pre-drilled to accept our ULTRALIGHT rail braces. These go under the rear bump stops and bridge the low center section of the rail required by the summit's suspension design. This allows you to maintain maximum rail strength on big impacts without sacrificing skid travel by increasing rail height. ULTRALIGHT rail braces are highly recommended for Summit riders who like to hit jumps and drops!**

 

Ski-Doo Gen5 Summit/Freeride Rails

$678.00
Select Color
Select Style
BomberClassic
Select Size
146154165175
Ski-Doo Gen5 Summit/Freeride Rails
Previous
Next
3/6

Rail Bracing

Ultralight Rail Brace Kit- - - IceAgePerformance

Ultralight Rail Brace Kit - for G4/G5 IceAge Rails (Required)

Ultralight Rail Brace Kit- - - IceAgePerformance

Ultralight Rail Brace Kit - for G4/G5 IceAge Rails

DESIGNED FOR ICEAGE RAILS  - WILL NOT FIT STOCK RAILS

Made out of 7000 series aluminum, our Ultralight Rail Brace Kit increases strength at the rear bump stop section of the rails. This is a must have for Ski-Doo Gen5, Gen4, and XM snowmobiles that are frequently being jumped, are under high load impact, or if you want added strength for peace of mind! The kit includes 2 stiffener plates and hardware for mounting.

IceAge rails for Gen5, Gen4, and XM are all pre drilled to accept the Ultralight Rail Brace. Other models are not directly compatible and may require drilling. Will not work on Polaris RMK Pro, RMK Khaos machines. 

Photos pictured are IceAge Ski-Doo Gen4 Classic rails.

Dimensions:

  • 13" overall length
  • 11" center to center on outside holes of brace with one hole in the center

Ultralight Rail Brace Kit - for G4/G5 IceAge Rails

$105.00
Ultralight Rail Brace Kit- - - IceAgePerformance
Previous
Next
4/6

Rear Skid Shocks

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP (Required)

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP

With input from our Backcountry Team, the new FOX lightweight mountain shocks for the Ski-Doo GEN5 improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control, especially in coil-over shock applications.

SKI SHOCKS ARE COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS,  34" or 36" FRONT ENDS INCLUDING LYNX RADIEN²

REAR SKID SHOCKS ARE COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS ONLY

SHOCKS FEATURES

  • Simple to use QS3 Compression / Rebound Adjustment

  • Lightweight Coil spring - tool free adjustment

  • Lightweight bodies and caps

  • Bypass technology for plush ride

  • Premium Fox Factory calibration

  • Preset / ready to ride right out of the box.

This shock is hands down the biggest performer for the dollar you will see on a modern mountain sled. The new lightweight coil spring and adjuster make for simple easy to change adjustments without the need for tools. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP

$2,096.00
Select Coil Shock Package
Track - FOX 1.5 Zero QS3R LightweightSki - FOX 1.5 Zero QS3R Lightweight
FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

With input from our Backcountry Team, the new FOX lightweight mountain shocks improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control.

 

These skid shocks are specific to the new G5 Summit skid and are not backwards-compatible with the G4 Summit skid.

Shocks Features

  • Simple to use QS3 Compression and Rebound Adjustment

  • Main air / Evol Air chambers for infinite air spring tunability

  • Lightweight bodies and caps

  • Bypass technology for plush ride

  • Premium Fox Factory calibration

  • Preset / ready to ride right out of the box.

ADJUSTMENTS

  • FLOAT air spring (ski / track front)
  • EVOL air chamber (ski)
  • QS3 — 3 position compression (ski)
  • QS3 — 3 position rebound (ski / track front)
  • QS3 — 3 position compression with lock-out mode (track rear)

The combination of the main air spring and the evol air chamber results in an incredibly progressive feel. This means a plush compliant ride over the bumps and ruts while soaking up the biggest jumps and drops without bottoming. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

$2,096.00
Select FLOAT Shock Package
Ski - FOX Float QS3R LightweightRear Skid - FOX Float QS3R Lightweight
FOX iQS for Gen5 Summit 1.5 coil QS3r LIGHTWEIGHT

FOX iQS for Gen5 Summit 1.5 coil QS3r LIGHTWEIGHT

IN STOCK NOW - QUANTITIES LIMITED

BENEFITS

  • Select profiles on-the-fly, permitting adjustments to suit varying terrain as you ride from the bar-mounted controller - No more bending down or stepping off the sled into the deep snow to change ride modes!
  • Engage rear track shock LOCKOUT mid-line as you encounter deeper and steeper terrain to avoid getting stuck!
  • Tangible improvements in ride handling
  • Enhances safety, efficiency, control, convenience, performance
  • No need to count clicks

HIGHLIGHTS

  • Electronic modal damping control via Bosch ECU (Electronic Control Unit)
  • Full range adjustment takes place in less than one second
  • NEW Lightweight bodies and springs
  • Wide range adjustment characteristics
  • Plug and Play wiring harness

FOX iQS for Gen5 Summit 1.5 coil QS3r LIGHTWEIGHT

$6,287.00
FREE Big Wheel BRP Kit (Promo) with purchase of FOX iQS
Big Wheel BRP Kit (Promo)

Big Wheel BRP Kit (Promo)

Do not add this product to your cart. Please visit the bundle page to edit.

This is a dummy product and must not be deleted or altered.

Dummy products are essential for the Bundle Builder app to function.

Learn more here: https://support.bundlebuilder.app/hc/en-gb/articles/4409557939473-Dummy-products

FOX 1.5 Zero QS3R Lightweight Coil - GEN5 BRP
Previous
Next
5/6

Ski Shocks

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX (Required)

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX


With input from our Backcountry Team, the new FOX lightweight mountain shocks improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control, especially in coil-over shock applications.

COMPATIBLE WITH GEN 5 SUMMIT BRP CHASSIS,  34" or 36" FRONT ENDS INCLUDING LYNX RADIEN²


Shocks Features

  • Simple to use QS3 Compression / Rebound Adjustment

  • Lightweight Coil spring - tool free adjustment

  • Lightweight bodies and caps

  • Bypass technology for plush ride

  • Premium Fox Factory calibration

  • Preset / ready to ride right out of the box.

This shock is hands down the biggest performer for the dollar you will see on a modern mountain sled. The new lightweight coil spring and adjuster make for simple easy to change adjustments without the need for tools. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX

$2,375.00
Select Coil Shock Package
Ski - FOX 1.5 Zero QS3 Lightweight
FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

With input from our Backcountry Team, the new FOX lightweight mountain shocks improved ride quality is as significant as their weight savings. While it may seem like a stretch, this technology has trickled down from our trophy truck engineering successes. Simply put, we’ve freed the shock to move comfortably by using internal grooves to bypass oil around the piston in the ride zone while providing increased bottom-out resistance for those big hits by eliminating the grooves in the last 30% of travel. This provides the plushness to ride all day with the control you need for maximum fun. Our objective? Retain that great FOX ride feel while increasing bottom-out control.

 

These skid shocks are specific to the new G5 Summit skid and are not backwards-compatible with the G4 Summit skid.

Shocks Features

  • Simple to use QS3 Compression and Rebound Adjustment

  • Main air / Evol Air chambers for infinite air spring tunability

  • Lightweight bodies and caps

  • Bypass technology for plush ride

  • Premium Fox Factory calibration

  • Preset / ready to ride right out of the box.

ADJUSTMENTS

  • FLOAT air spring (ski / track front)
  • EVOL air chamber (ski)
  • QS3 — 3 position compression (ski)
  • QS3 — 3 position rebound (ski / track front)
  • QS3 — 3 position compression with lock-out mode (track rear)

The combination of the main air spring and the evol air chamber results in an incredibly progressive feel. This means a plush compliant ride over the bumps and ruts while soaking up the biggest jumps and drops without bottoming. Couple this with the simple to adjust QS3 switch and you can go from powder carves to rough trail with the flip of a switch. No more fumbling with tiny iced up knobs and tiny adjustments you can't feel, the Quick Switch technology makes adjustment simple and clear. The positions represent real changes a rider can feel for easy to understand setting adjustments. Large background numbering makes it easy to see which position you are in. The QS3 tech is the perfect match for the mountain snowmobilers needs from novice to expert.

FOX FLOAT QS3R EVOL Lightweight air shocks - GEN 5 BRP

$2,096.00
Select FLOAT Shock Package
Ski - FOX Float QS3R LightweightRear Skid - FOX Float QS3R Lightweight
Free Big Wheel Kit with your purchase of FLOAT SKI + FLOAT SKID shocks
Big Wheel BRP Kit (Promo)

Big Wheel BRP Kit (Promo)

Do not add this product to your cart. Please visit the bundle page to edit.

This is a dummy product and must not be deleted or altered.

Dummy products are essential for the Bundle Builder app to function.

Learn more here: https://support.bundlebuilder.app/hc/en-gb/articles/4409557939473-Dummy-products

I Chose FOX iQS

I chose FOX iQS on previous step that includes ski and skid shocks.

FOX 1.5 Zero QS3R Coil Lightweight - GEN 5 BRP / LYNX
Previous
Next
6/6

Wheels

HELLFIRE 8" Wheel

HELLFIRE 8" Wheel (Required)

HELLFIRE 8" Wheel

HELLFIRE 8" Wheel

ALL WHEELS SOLD INDIVIDUALLY

Some say you should not try to reinvent the wheel. We beg to differ!

This is the solution we've all been waiting for. Our HELLFIRE wheel combines the tried and true strength of our billet Spitfire wheel with a new hybrid UHMW plastic outer ring for reduced weight, added serviceability, and most importantly the elimination of ice build-up issues.

With thousands of miles of testing in varying conditions and terrain behind us, we can confidently affirm that HELLFIRE is the ideal combination of strength, bearing support, light weight, style, and user serviceability to make it the longest-lasting and most versatile option on the market. 

Will not bolt on directly to stock polaris rmk/khaos rails, you will need the BIG WHEEL KIT w/ 7.25 to 9" offset axle to run HELLFIRE wheels on stock rails.

8" size is directly compatible with:

- Polaris RMK/Khaos models 2006 to 2024 equipped with ICEAGE rails

- Skidoo Summit 2013 to 2024

- LYNX 2022+ Boondocker and Shredder 146 (3700) or longer

- Arctic cat twinrail mountain sleds 2012-2018 w/ the addition of our Arctic Cat Proclimb/Ascender wheel spacer , 2019+ models are compatible with the additional of our 2-wheel 1/2" slot axle

- Yamaha Sidewinder M-TX Twinrail sleds 2013-2018 w/ the addition of our Arctic Cat Proclimb/Ascender wheel spacer , 2019+ models are compatible with the additional of our 2-wheel 1/2" slot axle

 

 Does not include axle.

Key features:

  • Reduced rotating mass from previous designs - (lighten your skid and increase throttle response)
  • Ice-free UHMW outer ring
  • User serviceable 
  • Superb hub strength 
  • Compatible with studded tracks!
  • Koyo 6004 bearing pre-installed

HELLFIRE 8" Wheel

$161.00
Select Color

I Chose FOX iQS

I chose FOX iQS on previous step that includes a FREE Big Wheel Kit.

HELLFIRE 8" Wheel
Previous
Confirm
Components
Product
Quantity
Price
Previous

Looking for the ultimate all-in-one handling performance and durability package on the market? Our MTN PROVEN build is the way.